Latitude

The Latitude 3000 Series (Entry-Level Models) supports up to 16GB DDR4 RAM and offers storage options of up to 512GB SSD or 1TB HDD. The Latitude 5000 Series (Mid-Range Models) can handle up to 32GB DDR4 RAM and offers up to 1TB SSD or 1TB HDD for storage. For the Latitude 7000 Series (Premium Models), the maximum RAM is 64GB DDR4, with storage options up to 1TB SSD or 2TB HDD in hybrid configurations.

Once the back panel is removed, locate the RAM slots, which are usually accessible in many models, with one or two available slots. If you're replacing old RAM, gently release the clips on either side of the stick, and the RAM will pop up slightly, allowing you to pull it out at an angle. To install the new RAM, align the notch on the stick with the slot, then insert it at a 30–45 degree angle. Press it down firmly until the clips snap into place. After the new RAM is securely installed, replace the back panel and reattach the screws you removed earlier to reassemble the laptop.

To remove the existing storage drive, for a 2.5” SATA drive, unscrew the mounting screws holding the drive in place and gently pull it out. For an M.2 SSD, unscrew the securing screw and carefully slide the drive out of the slot. To install the new storage, place the 2.5” SATA SSD/HDD into the same slot and secure it with the mounting screws. For the M.2 NVMe SSD, align it with the M.2 slot at a 30-45° angle, then firmly insert it and secure it with the screw.